GoodWe

GoodWe GW10KN-ET Plus 16A - 10kW Hybrid Inverter with Smart Meter

SKU: 1531

✓︎ 10 kW rated power, up to 15 kWp PV input, 2 MPP trackers
✓︎ Backup power: 10 kVA continuous, 16.5 kVA for 60 seconds
✓︎ Smart meter included, IP66, fanless and low-noise

Available immediately

Delivery time: 1 - 4 Workdays

799,00 €

incl. 0% VAT ,

Choose tax zone / country of delivery

Pay securely via:

Question about item

Ask us your question

GoodWe GW10KN-ET Plus 16A - 10kW Hybrid Inverter with Smart Meter

Question about item

Ask us your question

Description

The GoodWe GW10KN-ET Plus (16A series) is the most powerful model in the three-phase ET-PLUS+ lineup and is designed for households with a large PV system and high self-consumption. With 10 kW rated power, up to 15,000 W of PV input power, and a short-term backup reserve of 16,500 VA, it also covers demanding load profiles. The matching smart meter is already included in the scope of delivery.

Key Benefits for Your System

Generous PV sizing: Up to 15,000 W of PV input power at 10 kW AC rated power allows for significant oversizing of the array.
16 A per string: Two MPP trackers with 16 A input current each (21.2 A short-circuit current) are designed for current high-current modules.
Strong backup reserve: 10,000 VA continuous power at the backup output, briefly up to 16,500 VA for 60 seconds.
Fast battery charging: 10,000 W charge/discharge power at 25 A continuous current within a battery voltage range of 180 to 600 V.
Quiet and low-maintenance: Fanless convection cooling and IP66 protection rating for indoor and outdoor installation.

Smart Control for Maximum Self-Consumption

The GW10KN-ET Plus was developed for households that want to not only store their solar power but also use it purposefully. Via the integrated load control and the potential-free contact (dry contact), external loads such as a heat pump can be switched on according to time or status as soon as surplus power is available. The peak shaving function additionally limits power peaks drawn from the grid, relieving your household connection. Combined with the included smart meter, the inverter measures household consumption phase-accurately and automatically manages grid feed-in, battery charging, and self-consumption. Up to 22.7 A of grid draw is available to support large loads in grid-connected operation.

Safety, Communication, and Commissioning

On the DC side, a disconnect switch and a type II surge arrester are already integrated, and on the AC side a type III arrester. Insulation resistance measurement, residual current monitoring, reverse polarity protection, anti-islanding protection, and a remote shutdown function are included as standard. Setup is conveniently done via the SolarGo app, while system monitoring runs through the SEMS portal. WiFi is included as standard; WiFi+LAN and 4G are available as options. Battery communication is via CAN by default, with RS485 as an alternative. The unit is also "battery ready": you can initially operate it purely grid-connected and retrofit the battery storage later. Please note that the backup function may only be used with a battery connected.

GENERAL DATA (Basic device information)
Manufacturer	GoodWe
Model	GW10KN-ET (ET PLUS+ Series 16A)
Device type	Three-phase hybrid inverter
Rated power	10 kW
Topology	Non-isolated (transformerless)
Protection rating	IP66
Cooling method	Natural convection (fanless)
Dimensions (W × H × D)	415 × 516 × 180 mm
Weight	24 kg
Mounting type	Wall mounting
Operating temperature	–35 °C to +60 °C
Relative humidity	0–95 %
Max. operating altitude	4,000 m
Night-time self-consumption	< 15 W (without backup output)

PV INPUT (Solar array)
Max. PV input power	15,000 W
Max. input voltage	1,000 V (max. operating voltage 950 V)
MPPT operating voltage range	200 – 850 V
MPPT voltage range at rated power	460 – 850 V (Source: operating manual)
Start-up voltage	180 V
Rated input voltage	620 V
Number of MPP trackers	2
Strings per MPPT	1
Max. input current per MPPT	16 A
Max. short-circuit current per MPPT	21.2 A
BATTERY (High-voltage storage connection)
Battery type	Li-ion
Rated battery voltage	500 V
Battery voltage range	180 – 600 V
Number of battery inputs	1
Max. charge / discharge current	25 A / 25 A
Max. charge / discharge power	10,000 W / 10,000 W
AC OUTPUT (GRID-CONNECTED) (Feed-in & grid draw)
Rated output power	10,000 W
Rated apparent power to grid	10,000 VA
Max. apparent power to grid	11,000 VA (10,000 VA depending on country)
Max. apparent power from grid	15,000 VA
Rated output voltage	400 / 380 V, 3L/N/PE
Grid frequency	50 / 60 Hz (range 45 – 65 Hz)
Max. AC current to grid	16.5 A
Max. AC current from grid	22.7 A
Rated output current	14.5 A (Source: operating manual)
Power factor	~1 (adjustable 0.8 leading to 0.8 lagging)
Max. total harmonic distortion	< 3 %
AC OUTPUT (BACKUP) (Backup power supply)
Rated backup apparent power	10,000 VA
Max. apparent power off-grid	10,000 VA (16,500 VA for 60 s)
Max. output current	16.5 A
Rated output voltage / frequency	400 / 380 V, 50 / 60 Hz
Output THDv (linear load)	< 3 %
EFFICIENCY & PROTECTION (Efficiency and safety features)
Max. efficiency	98.2 %
European efficiency	97.5 %
Max. efficiency battery → AC	97.5 %
MPPT efficiency	99.9 %
DC disconnect switch	Integrated
DC surge protection	Type II (integrated)
AC surge protection	Type III
Additional protection features	PV insulation resistance measurement, residual current monitoring, PV reverse polarity protection, anti-islanding protection, AC overcurrent, short-circuit, and overvoltage protection
Remote shutdown	Integrated
COMMUNICATION & STANDARDS (Monitoring and certification)
User interface	LED, app (SolarGo)
BMS communication	CAN (standard) / RS485
Meter communication	RS485
Portal connectivity	WiFi; WiFi + LAN (optional); 4G (optional)
Noise emission	< 30 dB (Source: operating manual)
Grid standards	VDE-AR-N 4105, VDE 0126-1-1, EN 50549-1, G98, G99, G100, CEI 0-21 (Source: operating manual)
Safety standard	IEC 62109-1 & -2 (Source: operating manual)