Growatt

Growatt SPH 10000TL3 BH-UP Hybrid Inverter 10kW Three-Phase (High-Voltage)

SKU: 425

✓︎ 10 kW three-phase – 100% asymmetric output possible
✓︎ Backup power (UPS) with just 10 ms switchover time
✓︎ 98.2% efficiency, 2 MPP trackers, 15,000 W PV

Available immediately

Delivery time: 11 - 14 Workdays

1.116,18 €

incl. 0% VAT ,

Choose tax zone / country of delivery

Pay securely via:

Question about item

Ask us your question

Growatt SPH 10000TL3 BH-UP Hybrid Inverter 10kW Three-Phase (High-Voltage)

Question about item

Ask us your question

Description

The Growatt SPH 10000TL3 BH-UP is the most powerful model in the SPH-TL3-BH-UP series: a three-phase hybrid inverter with 10,000 W rated power that combines photovoltaic generation, battery storage, and backup power supply in a single device. It's the right choice for large rooftop systems, multi-family buildings, and commercial properties.

Your Benefits at a Glance

High PV utilization: With a DC/AC ratio of 1.5, you can connect up to 15,000 W of PV module power, achieving higher yields even in low light.
Backup power in 10 milliseconds: The integrated UPS function switches over so fast in the event of a grid outage that connected loads at the EPS output keep running – with up to 10,000 W of backup power.
Asymmetric feed-in: The inverter can distribute its power 100% across individual phases and limit feed-in precisely per phase.
Flexible battery connection: The wide battery voltage range of 100 to 550 V allows storage sizes from 7.68 to 76.8 kWh.
VPP interface: Via RS485, the system can be integrated into virtual power plants and controlled externally.

Performance That Pays Off in Everyday Use

Two independent MPP trackers with 13.5 A input current each reliably capture power even from differently oriented roof areas. The maximum efficiency of 98.2% and a European efficiency of 97.5% – the highest value in the series – ensure that only a small portion of the generated energy is lost during conversion. Battery charge and discharge efficiency is 97.4%.

Using the "Load First," "Battery First," and "Grid First" operating modes, you control when the battery storage is charged and when it discharges – either directly on the LCD display or conveniently via the Growatt monitoring portal. The export limit function restricts grid feed-in either overall or per phase.

The transformerless design operates completely fanless with natural convection; typical noise emission is 35 dB(A). Thanks to IP65 protection and an operating temperature range of −25 °C to +60 °C, outdoor installation is also possible. An integrated DC switch, Type II surge protection on both DC and AC sides, reverse polarity protection, insulation monitoring, and residual current monitoring are included as standard. Installation is only permitted by qualified professionals.

GENERAL DATA (Basic inverter information)
Manufacturer	Growatt
Model	SPH 10000TL3 BH-UP
Device type	Three-phase hybrid inverter (high-voltage battery)
Topology	Transformerless
Dimensions (W/H/D)	505 / 453 / 198 mm
Weight	30 kg
Protection rating	IP65 (Protection class I)
Cooling	Natural convection (fanless)
Noise emission (typical)	35 dB(A)
Operating temperature range	−25 °C to +60 °C
Relative humidity	0 – 100%
Max. altitude	3,000 m
Self-consumption (night)	< 13 W
Warranty	10 years
PV INPUT (DC) (Solar array connection)
Max. recommended PV power	15,000 W (STC)
Max. DC voltage	1,000 V
Start voltage	120 V
Rated voltage	600 V
MPP voltage range	120 – 1,000 V
Number of MPP trackers	2
Strings per MPP tracker	1
Max. input current per MPPT	13.5 A
Max. short-circuit current per MPPT	16.9 A
AC OUTPUT (GRID) (Grid-parallel operation)
AC rated power	10,000 W
Max. AC apparent power	10,000 VA
AC rated voltage (range)	230 V / 400 V (310 – 476 V)
Grid frequency (range)	50 / 60 Hz (45 – 55 Hz / 55 – 65 Hz)
Max. output current	15.2 A
Adjustable power factor	0.8 leading … 0.8 lagging
THDi	< 3%
Grid connection type	3W + N + PE
BATTERY (DC) (Storage connection)
Battery voltage range	100 – 550 V
Max. charge / discharge current	25 A
Continuous charge / discharge power	10,000 W
Battery type	Lithium battery
Battery capacity	7.68 – 76.8 kWh
BACKUP POWER / EPS (AC) (Emergency power supply)
Max. AC output power	10,000 W
Max. AC apparent power	10,000 VA
Max. output current	15.2 A
Nominal AC output voltage	230 V / 400 V
Nominal AC output frequency	50 / 60 Hz
THDv	< 3%
Switchover time	< 10 ms
EFFICIENCY & PROTECTION (Efficiency and safety features)
Max. efficiency	98.2%
European efficiency	97.5%
Max. battery charge / discharge efficiency	97.4%
DC switch	Yes
DC reverse polarity protection	Yes
Battery reverse polarity protection	Yes
Surge protection DC / AC	Type II
AC short-circuit protection	Yes
Ground fault monitoring	Yes
Grid monitoring	Yes
Anti-islanding protection	Yes
Residual current monitoring unit	Yes
Insulation resistance monitoring	Yes
COMMUNICATION & STANDARDS (Connections and certifications)
Interfaces	RS485 / CAN / USB
Monitoring	RF / Wi-Fi / GPRS / 4G (optional)
Display	LCD + LED
VPP interface	Yes (via RS485)
DC connector	H4 / MC4 (optional)
AC connection	Screw terminals
Safety	IEC/EN 62109-1, IEC/EN 62109-2, IEC 62040
EMC	EN 61000-6-1, EN 61000-6-3
Grid connection standards	VDE-AR-N 4105, VDE 0126, EN 50549, CEI 0-21, CEI 0-16, UTE C 15-712, C10/C11, IEC 62116, IEC 61727, AS/NZS 4777, G98, TOR Erzeuger