Sungrow

Sungrow 3PH Hybrid Inverter 6kW SH6.0RT incl. Smartmeter and Wi-Fi Stick

SKU: 480

✓︎ 6 kW rated power at 98.2% max. efficiency
✓︎ Backup power switchover in under 20 ms
✓︎ 2 MPP trackers and 150–600 V battery voltage range

Available immediately

Delivery time: 3 - 6 Workdays

609,99 €

incl. 0% VAT , plus

Choose tax zone / country of delivery

Pay securely via:

Question about item

Ask us your question

Sungrow 3PH Hybrid Inverter 6kW SH6.0RT incl. Smartmeter and Wi-Fi Stick

Question about item

Ask us your question

Description

Sungrow SH6.0RT is a three-phase hybrid inverter with 6,000 W AC rated power that combines photovoltaic generation, battery storage, and backup power supply in a single device. With a maximum efficiency of 98.2% and up to 9,000 W PV input power, it is suitable for new installations as well as for retrofitting storage to existing roof systems. Smartmeter and Wi-Fi stick are included in the scope of delivery [PLEASE VERIFY], so you can keep an eye on generation and consumption right from the start.

Key Advantages for Your System

Reliable power supply: In the event of a grid outage, the device switches to backup power in under 20 ms – with 6,000 W continuous power and up to 10,000 W briefly for 10 seconds.
Flexible design: Two independent MPP trackers allow the use of two differently oriented roof surfaces; the battery voltage range of 150 to 600 V is compatible with a wide selection of high-voltage battery storage systems.
High self-consumption: The integrated energy management automatically controls charging and discharging, so your solar power stays in your home instead of flowing into the grid.
Quiet operation: The fanless convection cooling generates only 30 dB(A), and the IP65 protection rating also allows outdoor installation.

Backup Power and Self-Consumption in Everyday Use

The SH6.0RT is fully capable of handling unbalanced loads in backup power mode. This means that even if your loads are distributed unevenly across the three phases, the inverter will continue to supply them – a practical advantage over devices that derate under unbalanced loads. Commissioning is done via the app, and firmware updates and parameter changes can be carried out remotely, so your installer doesn't necessarily need to be on-site for adjustments. For growing requirements, two devices can be operated in parallel. Push-in connectors on the AC side and MC4 (PV) and Sunclix (battery) connectors reduce installation time. At 460 x 540 x 170 mm and 27 kg, the device remains compact enough for wall mounting in utility rooms and garages.

GENERAL DATA (Basic information about the inverter)
Manufacturer	Sungrow
Model	SH6.0RT
Device type	Residential three-phase hybrid inverter
Dimensions (W x H x D)	460 x 540 x 170 mm
Weight	27 kg
Mounting type	Wall mounting
Protection rating	IP65

PV INPUT (Connection of solar modules)
Max. PV input power	9,000 W
Max. PV input voltage	1,000 V
Start voltage / rated voltage	250 V / 600 V
MPP voltage range	200 – 950 V (250 – 850 V at rated power)
Independent MPP trackers / strings	2 / 1 per MPPT
Max. PV input current	25 A (12.5 A / 12.5 A)
Max. short-circuit current	32 A (16 A / 16 A)
AC OUTPUT & BACKUP POWER (Grid feed-in and emergency power supply)
AC rated power	6,000 W
Max. apparent power	6,000 VA
AC rated current / max. output current	8.7 A / 9.1 A
AC rated voltage	3 / N / PE, 220/380 V; 230/400 V; 240/415 V
Grid frequency	50 Hz (45 – 55 Hz) / 60 Hz (55 – 65 Hz)
THD / power factor	< 3% at rated power / > 0.99
Backup power rated power	6,000 W / 6,000 VA
Backup power peak power	7,200 W for 5 min; 10,000 W for 10 s
Backup power switchover time	< 20 ms
BATTERY & SYSTEM (Storage connection and efficiency)
Battery voltage range	150 – 600 V
Max. charge / discharge current	30 A / 30 A (depending on the connected battery)
Max. charge / discharge power	9,000 W / 7,200 W
Max. efficiency	98.2%
European efficiency	97.5%
Isolation type (solar / battery)	Transformerless / Transformerless
Parallel connection	Yes, up to 2 devices
Operating temperature range	-25 °C to +60 °C
Cooling principle / noise emission	Convection (fanless) / 30 dB(A)
Max. operating altitude	4,000 m (power derating above 3,000 m)
COMMUNICATION & CONNECTIONS (Monitoring, protection, and wiring)
Communication	RS485, Wi-Fi, Ethernet, 1x Digital Output, 4x Digital Input
Display	LED
DC connection	MC4 (PV) / Sunclix (battery)
AC connection	Plug-and-play connector
Protection functions	LVRT, anti-islanding protection, AC short-circuit protection, leakage current detection, DC switch (solar), DC fuse (battery)
Surge protection	DC Type II / AC Type II
Compliance	IEC/EN 62109-1, IEC/EN 62109-2, IEC/EN 61000-6-1, IEC/EN 61000-6-3, IEC/EN 61000-3, EN 62477-1, VDE-AR-N 4105, AS/NZS 4777.2