K2 Systems S-Dome Flat Roof Mounting Set for 3 Modules 10°

Product Description & Introduction

The K2 Systems S-Dome Flat Roof Mounting Set 10° for 3 Modules is specifically designed for flat roofs with a low pitch. It is based on the proven K2 Dome 6.10 system, which has been widely used in practice. The system is hardware-optimized for ballast and allows for secure, statically resilient installation without roof penetration (under certain conditions).

Even in the planning phase, users benefit from the flexible compatibility with various roof types such as bitumen, membrane, gravel, or green roofs. K2 places special emphasis on providing components as pre-configured as possible to reduce installation time and potential errors.

The exact 10° tilt angle is ideal for south-facing installations and optimal energy yield on flat roofs. At the same time, the system ensures controlled ballasting and compatibility with K2 fix connections when the roof pitch exceeds 3°.

In practice, the system is characterized by quick installation, form-fitting connection elements, and proven components such as Dome-Clamps, Windbreaker, and SpeedPorter. Thanks to these components, the mounting set can often be installed without additional tools or special solutions.

Furthermore, the system choice is well supported in K2's planning software "K2 Base" and other tools, including static calculations and documentation for approvals.

Components & Functionality

The mounting set includes all essential components for the elevation and securing of 3 solar modules on the flat roof. The components can be assembled in a structured manner and ensure stable support under wind and snow loads.

The main function is to mount modules at a tilt angle of 10°, protect against wind forces with construction elements like Dome-Peaks, base elements, and Windbreaker, and securely attach modules to the frame with clamps (DomeClamp MC/EC).

The SpeedPorter (carrier profiles/connection elements) serve to connect and guide the modules on the set, ensuring precise positioning and resistance to shear forces.

Advantages & Applications

Easy Installation – The components are modular and fit together; common elements like SpeedPorter or DomeClamp allow for quick installation without elaborate special tools.
\nBallast-Optimized & Secure – Thanks to careful material selection, friction mats, and wind gauges, ballast amounts adjust and efficiently secure the construction against wind loads.
\nSystem Compatibility – As the set is based on the K2 Dome 6.10 system, it is compatible with other K2 components and planning tools.
\nFlexibility in Application – Suitable for various flat roof types (bitumen, membrane, gravel roofs, possibly green roofs) and adaptation to roof pitches over 3° with fix connectors.
\nProven Static & Approvals – The system follows K2 standards and allows for static verification through planning software.

Scope of Delivery

\n
• 4 × K2 S-Dome 6.15 Base Set L (Article Number 2004176)
\n
• 4 × K2 Dome 6.15 Peak (Article Number 2004174)
\n
• 3 × K2 S-Dome 6.15 Windbreaker short (Article Number 2004179)
\n
• 4 × K2 DomeClamp MC Black Set 30-50 mm (Article Number 2002609)
\n
• 4 × K2 DomeClamp EC Black Set 30-50 – 2004564
\n
• 16 × K2 Dome SpeedPorter (Article Number 2002300)
\n

Note

Please check whether the local conditions of your construction project differ from these assumptions and require changes. This package does not replace planning through K2 Base. Solarscouts assumes no liability for the planning and statics of systems built with this package.