Question about item
Stell uns deine Frage
Description
Productinformation in detail
ApSystems EZHI/EZ1 Balcony Power Plant with Storage – 2.0 kWp (4 × 500 Wp Modules)
This set bundles four bifacial JA Solar JAM60D41-500/LB_FB modules at 500 Wp each, the single-phase hybrid microinverters ApSystems EZHI and EZ1, and a Felicity LUX-E-48100LG04 storage with 5.12 kWh. Result: up to 2.0 kWp solar power on just about 8 m² of space. Surpluses go directly into the battery and are available at night or during a power outage – all without a professional installer.
Why the EZHI Outpaces the Competition
-
Hybrid instead of Standard: Simultaneous feeding, charging, and discharging – surpluses are automatically buffered and fed back when needed.
-
UPS Function < 10 ms: If the grid fails, the EZHI switches almost seamlessly. Router, lights, and refrigerators keep running.
-
96% Efficiency Thanks to GaN Power Electronics: More usable energy, no fans, completely silent.
-
Full App Control: Adjust feed-in limit (800–1200 W) and retrieve live data with AP EasyPower via Bluetooth or WiFi.
-
IP65 Housing: Weatherproof for balcony, terrace, or garage roof.
-
Open Battery Interfaces: 48-V storage freely expandable.
Solar Modules: Robust 500-Wp Units
-
Power: 500 Wp per module, totaling 2.0 kWp DC.
-
Bifacial Cell Technology uses rear-side light for > 5% additional yield.
-
22.6% Module Efficiency – top class.
-
30-Year Linear Performance Guarantee and 15-Year Product Warranty.
-
Load Capacity: 5400 Pa front, 2400 Pa back.
-
Dimensions: 1953 × 1134 × 30 mm, weight 27.3 kg per module.
Storage: Felicity LUX-E-48100LG04
-
Capacity: 5.12 kWh at 51.2 V.
-
LiFePOâ‚„ Chemistry: > 6000 cycles @ 80% DoD.
-
Interfaces: CAN, RS485/232 – EZHI speaks native CAN.
-
Modular: Stackable up to 6 packs (30.72 kWh).
-
42 kg, 442 × 420 × 132 mm, IP20.
Installation in Five Steps – DIY-Friendly
-
Mount Modules – Align rails, tighten module clamps.
-
Wire DC – Plug MC4 connectors into the EZHI; 12–60 V input.
-
Connect Storage – Plug in CAN cable, screw in plus/minus.
-
AC Side – Plug Schuko or Wieland into the balcony socket; EZHI factory-limited to 800 W.
-
Start App, Scan, Done – Update firmware, set feed-in limit, check live data.
Plug-in solar devices up to 800 W are approval-free; you only register in the market master data register. Total effort including app: ~60 minutes.
Practical Benefits
-
Maximize Self-Consumption: Use electricity directly during the day, from the battery at night.
-
Emergency Power: Switching time < 10 ms – no interruption.
-
Portable Use: EZHI weighs 8 kg – also suitable for camping.
-
Scalable: More modules or storage? Just plug in.
-
Real-Time Monitoring: All energy flows in the app.
Zero Feed-In – Explanation and Setup
With zero feed-in, the generated solar power is used exclusively in your own household – either directly by consumers or to charge a storage unit. No energy is fed into the public grid.
Control is via the Ecotracker, which measures the power flow at the meter and instructs the inverter via the EasyPower app to limit the feed-in to 0 W. This ensures that no feedback into the grid occurs.
This function is useful or necessary if there is no feed-in permit or if only self-consumption is desired. Despite zero feed-in, the photovoltaic system must be registered in the market master data register of the Federal Network Agency. Systems with an inverter power of over 800 W must also be registered with the local grid operator.
Setting Up Zero Feed-In (Tutorial)
Connect Balcony Power Plant:
Ensure that the balcony power plant is correctly connected to the house grid and the inverter is operational.
Attach Ecotracker to Power Meter:
Attach the Ecotracker to the designated measuring point of the power meter (magnet point). Ensure correct seating and stable connection.
Add Ecotracker in the EasyPower App:
- Open the EasyPower app and log in.
- Go to Settings → Third-Party Devices → Add Device.
- Select the brand of the Ecotracker, assign a name, and confirm.
Activate Smart Connectivity:
After successful connection, switch to Settings → Scene and activate "Smart Connectivity".
Activate Zero Feed-In:
In the app, turn on the "Zero Feed-In" option. This ensures that no power is fed into the public grid.
Check Function:
Observe in the app or at the meter whether the feed-in value remains at 0 W, even when the system produces power. This confirms that zero feed-in is active.
Technical Highlights at a Glance
ApSystems EZHI
-
2 × 600 W PV inputs, start voltage 18 V
-
MPPT range 12–48 V, max. 17 A per string
-
AC power 800 VA (via app 600–1200 VA)
-
Efficiency max. 96.2%
-
UPS switching time < 10 ms
-
IP65, -40 °C … +65 °C, 8 kg
ApSystems EZ1
-
2 × 500 W PV inputs, start voltage 16 V
-
MPPT range 16–55 V
-
AC power 800 VA (via app 600–800 VA)
-
Efficiency max. 96%
-
IP67, -40 °C … +65 °C, 3.5 kg
-
Communication: WiFi + Bluetooth, AP EasyPower App
JA Solar JAM60D41-500/LB_FB
-
500 Wp, bifacial, 22.6% efficiency
-
1953 × 1134 × 30 mm, 27.3 kg
-
Temperature coefficient –0.30%/°C
-
15-Year Product & 30-Year Linear Performance Warranty
-
5400 Pa (Front), 2400 Pa (Back)
Felicity LUX-E-48100LG04
-
51.2 V, 100 Ah, 5.12 kWh
-
LiFePOâ‚„, > 6000 cycles @ 80% DoD
-
CAN, RS485/232, Plug-&-Play
-
42 kg, 442 × 420 × 132 mm
-
IP20, stackable up to 6 units
Conclusion
With the ApSystems EZHI/EZ1 Balcony Power Plant with Storage, you get a 2.0 kWp PV system, a smart microinverter, and a robust LiFePOâ‚„ battery on your balcony. Installation takes about an hour, and approvals are not necessary thanks to the 800 W AC limit. This way, you immediately reduce your electricity bill and are self-sufficient in case of a power outage.
| Item information | Value |
|---|---|
| Shipping weight: | 183,30 kg |
| Item weight: | 174,32 kg |
Datenblatt - Solarmodul
Datenblatt - APsystems EZHI
Datenblatt - Felicity LUX-E-48100LG04 (EN)
Batteries Declaration - FLA-FLS-FLH and LUX Series (EN)
Installationsanleitung - APSystems EZHI mit Speicher
Benutzerhandbuch - LUX-E-48100LG04 (DE)
APsystems EZHI - Battery Compatibility List of EZHI Series (EN)
APSystems - EZHI Benutzerhandbuch (DE)
Datenblatt - APsystems EZ1-Serie
Benutzerhandbuch - APSystems Microwechselrichter EZ1-Serie
Bedienungsanleitung - APsystems EZ1-Serie
Variations
All variations to this product.Question about item
Stell uns deine FrageBatteries Declaration - FLA-FLS-FLH and LUX Series (EN)
Installationsanleitung - APSystems EZHI mit Speicher
APsystems EZHI - Battery Compatibility List of EZHI Series (EN)
Benutzerhandbuch - APSystems Microwechselrichter EZ1-Serie
Reviews
Wir freuen uns auf deine BewertungThere are no reviews yet.